1964-1973 302 5.0 Clutch Equalizer Pivot Mount Bracket
MSRP:

$58.95
REFERENCE: TRA-658-513

Retrofit bracket for late 5.0 engines without the "cast in" pivot boss on the block, used for 5.0 Engine Conversions...

Find A Dealer
Register Product | View Shipping Rates
Product Details

Retrofit bracket for late 5.0 engines without the "cast in" pivot boss on the block, used for 5.0 Engine Conversions

This bracket is essential when installing a late model 5.0 engine in an early car with a standard mechanical clutch linkage. This bracket will save you hours of work and frustration.

Proudly Manufactured in the USA by CPC

Limited Lifetime Warranty - The Best Warranty in the Industry -

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Derek
Mods needed for auto trans

I purchased this bracket to use with my original column shifter on a 1971 maverick with a modern 5.0 and c4 in it. I know the bracket is designed for a clutch z bar but I figured it used the same hole for the column shifter. Turned out the auto bell housing must be a different thickness than a manual bell housing and needed some modification of the bracket and bell housing. However the bracket still works for my application and saved me a bunch of time over fabricating my own or a bunch of money over buying an ugly aftermarket floor shifter. Put a couple of spacers under the bracket and shaved a little off of the bracket and bell housing and it is working great so far. The bracket is very well built and I have no doubt it would be a bolt in piece for what it is advertised for. Very happy I could use my original shifter with my engine swap.

Related Products

1965-1966-1967-1968-1969-Ford-Mustang-carbon-fiber-outside-bullet-mirror-rotunda-style-driver-side-door-side-view
1965-1973 Ford Mustang Carbon Fiber Bullet Mirror Assembly "Flat Glass"
  California Pony Cars is proud to present our 1965-1973 Ford Mustang Carbon Fiber bullet mirror. This mirror is a...
1964-1966 Mustang Billet Hood Hinges
1964-1966 Mustang Billet Hood Hinges
 1964-1966 Mustang Billet Aluminum Hood Hinges. These hood hinges are direct bolt on replacements and are fully adjustable with no...
T5, C6 31 Spline transmission Slip Yoke
T5, C6 31 Spline transmission Slip Yoke
California Pony Cars, 31 Spline Transmission Slip Yoke for Tremec TKX, TKO600 and C6 transmissions, uses 1330 U-Joint.  
1965-1970 C6 Kick Down Cable
1965-1970 C6 Kick Down Cable
California Pony Cars kick-down cable ensures exact shift points during the lifespan of your transmission when paired with a properly...
1969 Mustang ABS Fender splash shield set
1969 Mustang ABS Fender splash shield set
ABS Fender splash shields for your 1969 Mustang are a great replacement for your worn out C9ZZ-16102/3-K splash shields. Made as a Direct-fit...
FORD-TREMEC-TKX-5-Speed-Manual-Transmission-TCET17765-right-side-view-T5-conversion-Mustang
TREMEC TKX 5-Speed Manual Transmission
California Pony Cars proudly introduces the latest part to complete our award-winning CPC T-5 Conversion Kit, the Brand New TREMEC...
1964-1966 Mustang Horn Ring Emblem, Running Horse on Tri-Color Bar
1964-1966 Mustang Horn Ring Emblem, Running Horse on Tri-Color Bar
This premium quality 1964-1966 Mustang horn ring emblem, running horse on tri color bar with black background. Used on 3-spoke...
1967-1968-1969-1970-1971-1972-1973-FORD-MUSTANG-T5-TKO-TKX-CONVERSION-BACK-UP-LIGHT-CONNECTOR-PIGTAIL-PLUG-C5ZZ-15520-ELE-673-047-TOP-VIEW-CALIFORNIA-PONY-CARS-C5ZZ-15520-5SPD
1967-1973 Mustang T5/TKX Conversion Back Up Light Switch Connector Harness
  1967-1973 Mustang T-5 / TKX conversion back up light switch pigtail connector harness, used when installing a T5 or...
1971 Mustang Convertible Quarter Trim Panels without Seat Belt Holes
1971 Mustang Convertible Quarter Trim Panels without Seat Belt Holes
The 1971 Mustang convertible interior quarter trim panels without seat belt holes, ABS LH & RH side. Specific to 1971...
1965-1968 Mustang Coupe Interior Quarter Trim Panels with Arm Rest & Speaker Pod
1965-1968 Mustang Coupe Interior Quarter Trim Panels with Arm Rest & Speaker Pod
1965-1968 Mustang coupe ABS interior quarter trim panel with arm rest & 6½" round speaker pod, perfect for your Resto-Mod...
1967-1968 Mustang Fastback/Shelby Quarter Trim Panel with Roll Bar Cut-Out
1967-1968 Mustang Fastback/Shelby Quarter Trim Panel with Roll Bar Cut-Out
Our 1967-68 Mustang Fastback / Shelby Interior Rear Quarter Trim Panel with Roll Bar Cut-Out, LH & RH Side is...

Added to Cart

REFERENCE: