Restore Proper Clutch Fork Operation
Sloppy clutch pedal feel, inconsistent engagement, or difficulty shifting gears in your classic Ford manual transmission vehicle is often caused by a worn clutch fork pivot bracket inside the bellhousing. This clutch fork pivot fulcrum bracket kit from California Pony Cars restores the fixed pivot point required for proper clutch fork geometry and smooth clutch operation.
The clutch fork pivot fulcrum bracket mounts inside the bellhousing and serves as the structural pivot point for the clutch fork. When this bracket becomes worn, cracked, or loose, clutch fork movement becomes misaligned, resulting in inconsistent clutch engagement, poor pedal feel, and accelerated wear on the release bearing, pressure plate fingers, and clutch fork.
This direct replacement bracket is engineered to Ford Motor Company OEM specification C8AZ-7522-B to restore proper clutch linkage geometry and reliable clutch system operation on classic Ford manual transmission vehicles.
Commonly referred to as a clutch fork pivot bracket, clutch fork fulcrum bracket, or bellhousing clutch fork pivot, this component is critical for maintaining correct clutch linkage movement.
Designed for clip-type clutch fork retainer applications only. All mounting hardware is included for a complete installation.
Backed by a Limited Lifetime Warranty from California Pony Cars.
What's Included
Clutch Fork Pivot Fulcrum Bracket (x1)
Reproduction bracket engineered to Ford Motor Company OEM specification C8AZ-7522-B. Installs inside the bellhousing and provides the correct pivot point for the clutch fork.
Socket Head Cap Screws (x2)
Flat socket head fasteners designed to provide proper clearance at the bellhousing mounting locations.
Split Lock Washers (x2)
Helps prevent fastener loosening caused by drivetrain vibration and heat cycles.
Mounting Nuts (x2)
Completes the hardware set required for a secure installation.
Vehicle Compatibility
For clip-type clutch fork retainer applications.
V8 manual transmission vehicles only.
Ford Mustang — 1967–1975
Ford Bronco — 1968–1977 (V8)
Ford Falcon / Falcon Futura — 1968–1970 (289, 302 V8)
Ford Fairlane / Fairlane 500 / Fairlane GT — 1968–1970 (V8, from 2/15/68 production)
Ford Torino / Torino GT — 1968–1971 (V8, from 2/15/68 production)
Ford F-100 / F-250 / F-350 Pick-Up — 1970–1976 (V8)
Mercury Cougar / Cougar XR7 — 1968–1973 (from 2/15/68 production)
Part Number: TRA-670-552
OEM Cross Reference: C8AZ-7522-B
Why Replace the Clutch Fork Pivot Bracket
Restores correct clutch fork geometry
A worn pivot bracket allows the clutch fork to move outside its intended arc, resulting in inconsistent clutch engagement and poor pedal feel.
Protects critical clutch components
Proper clutch fork pivot alignment reduces stress on the release bearing, pressure plate fingers, and clutch fork.
Direct OEM specification replacement
Engineered to Ford Motor Company specification C8AZ-7522-B for proven fit and function.
Complete installation hardware included
All required mounting fasteners are included for installation.
Limited Lifetime Warranty
Backed directly by California Pony Cars against defects in materials and workmanship.
Important Notes
For clip-type clutch fork retainer applications only. Verify that your clutch fork uses a clip-type retainer before ordering.
Apply thread locker to mounting fasteners during installation. Inspect bellhousing mounting bosses for thread damage or wear before installing the new bracket.
Installation and Technical Support
Installation requires basic hand tools. The bracket mounts inside the bellhousing at the factory mounting locations using the included socket head cap screws, lock washers, and nuts.
Apply thread locker to mounting fasteners before final torque.
California Pony Cars technical support is available during business hours at 888-CAL-PONY (888-225-7669). You will speak with a knowledgeable team member familiar with this product.
Monday–Thursday: 8:00 AM – 4:30 PM PST
Friday: 7:00 AM – 3:30 PM PST
Manufacturer Information
California Pony Cars has been manufacturing and sourcing quality classic and late-model Ford parts in Ontario, California since 1988.
California Pony Cars is an Official Ford Licensed Manufacturer on select products and holds Mustang Club of America approval on qualifying items.
All California Pony Cars products are backed by a Limited Lifetime Warranty against defects in materials and workmanship. Warranty coverage is honored directly by California Pony Cars.
Register your product at calponycars.com to activate warranty coverage.
