Disk Brake Tie Rod Adapters


 
 
Our adapters were designed to fit right into the spindles with no further modification, now all it takes is two adapter bushings for the outer tie rods to fit. Prior to this, it had been necessary to install a complete V-8 Mustang steering set-up on 6-cylinder cars in order to install Disk Brakes. 6-Cylinder Mustangs have a very small outer tie-rod end that can not fit the larger disk brake spindles. 1965-1966 Mustangs with V-8 and power steering have a unique driver side outer tie rod, So when you are installing disk brakes from a Granada, Maverick, Versailles, or 1970-1973 Mustang or Cougar on a 1965-1966 Mustang with power steering, a later model tie rod can not be substituted.



 
SUS-679-937 | 1967-1969 Disc Brake Tie Rod Adapters

SUS-646-938 | 1964-1966 Disc Brake Tie Rod Adapters

SUS-679-939 | 1967-1969 Disc Brake Tie Rod Adapters

SUS-643-940 | 1964-1973 Disc Brake Lower Ball Joint Adapter

SUS-646-936 | 1964½ - 1966 Disc Brake Tie Rod Adapters

SUS-657-941| 1965-1967 Disk Brake Tie Rod Adapters




















 



← Previous post
Next post →

Added to Cart

REFERENCE: